Payment & Shipping Terms:
|Name:||Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source||Control System:||RDworksV8 With Mainboard RDC6442S|
|Working Area(mm):||1300*900mm||Motor & Driver:||57 Stepper Motor & Leashine Driver M542|
|Rail:||Hiwin Square Linear Rails||Cutting Speed:||0-200mm/s (according To The Different Materials And Thickness)|
|Engraving Speed:||0-1000mm/s (according To The Effect Required)||Application:||Acrylic, Two-color Board, PVC, Wood Board, MDF, Leather, Paper, Cloth, Stone, Tombstone, Glass|
mixed laser cutting machine,
co2 laser engraver engraving machine
QCL 1390 CO2 laser cutting engraving machines (cutter & engraver machines) can engrave and cut almost any non-metallic materials, and it is cheap, safe and reliable. The QCL 1390 laser cutting engraving machines use non-contact machining without mechanical compression or mechanical stress on the material. There is no “knife mark”, it does not damage the surface of the workpiece, and it does not deform the material. Therefore, it is widely used for cutting and engraving non-metallic materials such as acrylic, wood board or sheet, two-color board, foam board, organic board, bamboo, two-color plates, acrylic sheets, cloth and so on.
1). Online and offline operation modes can be available : supporting 10/100M Ethernet and supporting all brands and capacities of U disks;
2). Ethernet data transmission with data safety verification to ensure the data accuracy when at high speed data transferred.
3). 256M large-capacity file storage on mainboard, no bottlenecks limit for file size;
4). With professional motion control chip , it has the function of high speed curve cutting and the shortest path selection, which largely improves your working efficiency.;
5). Display processing path, file preview;
6). Display processing progress bar;
7). The controller has better resistance to high voltage and antistatic ability;
8). Soft/hard limit coordinates protection for optional;
9). Online update mainboard program, convenient for maintenance and functions customization and free upgrade service is available
10). Support Power-off restart for engraving, work time preview (high accuracy to millisecond, the preview time is exact to the actual working time);
11). Support machines backlash compensation function;
12). System Power-on resetting or not resetting for optional;
13). Support multiple positioning points logic;
14). All manufacturer/user parameters can be backup and restored;
15). Engraving and cutting can be done at the same time.
Applications of Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source:
QCL 1390 CO2 laser cutting engraving machines (cutter and engraver machines) has a wide range of processing materials, smooth cutting edges, no burrs, no polishing, no noise, no dust, fast processing speed, high precision, less waste and high efficiency.
1. Advertising industry:
a. Double-colored board carving /engraving or cutting;
b. Organic glass cutting;
c. label carving /engraving or cutting;
d. crystal cup carving /engraving;
e. Warranty signed carving /engraving;
f. Glass carving /engraving (can not cutting glass);
2. Arts and crafts industry:
a. Wood and Solid wood board carving /engraving or cutting;
b. Bamboo carving /engraving or cutting;
c. Ivory carving /engraving or cutting;
d. Bone carving /engraving or cutting;
e. Leather carving /engraving or cutting;
f. acrylic carving /engraving or cutting;
g.Paper and paper board cutting;
h. MDF carving /engraving or cutting;
3. Packing and printing industry:
a. Rubbery board cutting;
b. Plastic board cutting;
c. Double-layered board carving /engraving or cutting;
e. Aluminum composite panel;
4. Leather clothing industry:
a. Flocking cloth, non-woven fabric, EVA carving /engraving or cutting;
b. Cloth carving /engraving or cutting;
c. Synthetic leather carving /engraving or cutting;
d. Man-made leather carving /engraving or cutting;
e. Cutting on hypoderm;
5. Architectural model industry:
a. ABS board cutting;
b. PVC carving /engraving or cutting;
6. Production totem industry:
a. Appliance signs;
b. Anti-fake commodities marking;
6. Stones industry:
a. Marble carving /engraving;
b. Tombstone carving /engraving;
c. Granite carving /engraving;
e. Tile carving /engraving;
7. Production totem industry:
a. Appliance signs;
b. Anti-fake commodities marking.
Technical Parameters of Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source:
Co2 Laser Cutting Engraving Machine Stone Marble Tombstone Engraving 1300*900mm
|Working Platform||Honeycomb or blade workigntable|
|Controlling System||RDworksV8 with mainboard RDC6442S (or Leetro MPC 8530S or 9530S)|
|Laser Type||CO2 sealed-glass tube with circulating-water cooling|
|Engraving speed||0-1000mm/s (according to the effect required)|
|Cutting Speed||0-200mm/s (according to the different materials and thickness)|
|Cutting Thickness||According to the thickness and materials|
|Power Range||0--100% can be adjusted in controlling panel or software|
|Resetting Positioning Accuracy||±0.01mm|
|Min. Shaping Character||
English character 1mm*1mm
Chinese character 2mm*2mm
|Driving System||DC3.2A 48V 3 phase stepper motor Leadshine or YAKO brand|
|Position System||Red dot (as standard machine part)|
|Front-rear Channel Feed Function||Yes, Channel feed for infinite length material processing|
|Laser Tube Power||
RECI W2 ( 90-100w ) ;
W4 ( 100-130W );
W6 ( 130-160W );
W8 (160-190W ).
|Working life of tube||3000-10,000 hours (under EFR / RECI operating instructures)|
|Laser Tube Cooling Mode||Circulating water cooling (water pump or water chiller with the machine)|
1. Laser engraving cutting controlling software RDWorksV8 or Lasercut2017 (English version)
2. User manual of laser machine(English version)
3. User manuals of software and controllor system
4. USB cable and Ethernet cable (for communicating with computer.)
5. 3 reflecting mirrors (has been installed in the machine)
6. one focus lens(has been installed in the machine )
7. one laser tube(we remove it from the machine for delivery safety)
8. auxiliary devices: water pump for circulating laser tube;
air pump for blowing off smoke;
dust exhaust fan to carry smoke to outside.
9. tool box for repairing and maintenance.
|EXTRA PARTS need extra fee||
1. motorized up-down workign table;
2. rotary device;
3. industrial chiller cw3000 /5000 /5200
4. Air filter (no need to carry smoke outside)
5. CCD camera
|Graphic Format Supported||
Vector format:dxf, ai, plt, dst, dsb…etc.
Bitmap format:bmp, jpg, gif, png, mng,…etc.
|Software Supported||CorelDraw, AutoCAD , Photoshop, Adobe illustrator,Tajima|
|Computer Interface||Off-line/USB / ETHNET / ROUTER (wifi connecting)|
|Power Supply||AC 2 phase 220V/50Hz, 110V/60Hz|
Humidity 5%-95% (no condensation)
|Applicable Materials||It can cut and engrave non-metallic materials such as acrylic, two-color board, PVC, wood board, MDF, leather, paper, cloth, etc. It can also engrave glass and stone.|
|Applicable Fields||Advertising industry, decoration and decoration industry, photo (frame)processing, craft gifts,cloth /leather processing, glass /stone/tombstone/marble/ engraving and other industries|
Machine Parts of Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source:
Cutting Thickness of Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source:
|Laser power/max:thickness||Acrylic (mm)||Plywood (mm)||MDF (mm)|
Our Service of Dual Head Laser Cutting Engraving Machine Cutter Engraver With CO2 Laser Source:
1. The company who initially provide 3 years warranty in the world;
2. 24-hour full after sales service;
3. All finished machines we delivered are 100% strictly tested by our QC department and engineering department and sending working zamples together with machines;
4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.
5. Standard Package List as below:
|QCL 1390 Co2 laser marble stone tombstone engraving machine||1 set|
|Laser tube||According to your working requirements (with water pump or water chiller)|
|AIR PUMP 005||2 set|
|Exhausted fan 550W||1 set with pipes and fixing rings|
|Tool box||1 set (with Allen wrenches,acrylic blocks for alignment, U disk, working samples and so on)|
|Extra parts||As for your order|
Q1: How about warranty?
A1: 36-months quality guaranty, the machine with main parts(excluding the consumables such as laser tube and reflectors and lens) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.
We offer lifetime technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.
Q2: What's the delivery time?
A2: 5-8 working days to delivery port.
Q3: What's the usually delivery terms?
A3: FOB, CIF, DDP, Exworks will be OK.
Q4: What's the MOQ?
A4: 1 set.
Q5: What's the delivery port?
A5: Usually Qingdao port, also we can deliver machines to Shanghai port and Guangzhou.
Q6: What's the packing?
A6: Iron Pallet and export- standard Plywood cases .
Q7: Can you place OEM orders?
A7: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q8:Where is your factory located? How can I visit there?
A8:Our factory is located in JiNan City, Shandong Province, China, about 2 hours from Beijing, 3.5 hours from Shanghai and 10 hours from Guangzhou by high-speed train.
Contact Person: Miss. Carol Zhu
Tel: 0086 131 7644 1785