Payment & Shipping Terms:
|Name:||Plasma Flame Cutting Machine With Rotary||Control System:||Beijng STARFIRE SF-2100C-QG|
|THC:||HYD Arc Voltage Plasma Height Controller XPTHC-5||Motor & Driver:||86 Stepper Motor & Leashine Driver M860H|
|Rail:||Hiwin NO 20 Square Linear Rails||Cutting Speed:||0-8000mm/min For Plasma Cutting; 1-800mm/min For Flame Cutting|
|Travelling Speed:||0-10000mm/min||Application:||Iron Sheet, Aluminium / Copper Sheet,galvanized Sheet,stainless Steel Plates,carben Steel Plates,wild Steel|
cnc plasma cutting table,
plasma metal cutting machine
Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
Descriptions of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
QCP CNC Plasma cutting and flame cutting machine is a new type of thermal cutting equipment. It works by using a plasma arc (with compressed air) or a high-temperature high-speed flame (with oxygen + acetylene or propane) as a heat source to partially melt and cut metal simultaneously, then blow away the molten metal with a high-speed air stream so as to form a narrow slit. The machines not only have high cutting speed, narrow slit, flat cut, small heat affected zone, low deformation of the processing metal, simple operation, but also with remarkable energy saving and material saving effect.
Applications of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
QCP plasma cutting machines are widely used to cut iron sheet,aluminium / brass / copper / titanium / nickel sheet,galvanized sheet,stainless steel plates,carben steel plates,wild steel, alloy steel and almost all metal plate and pipes (needs rotary device for pipes-cutting as in this machine ) with fast working speed, high precision and low cost.
Machine technical parameters of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
|I. Basic Configuration Technical Parameters|
|Machine package dimension & weight||2280mm×3800mm×1700mm 1100KG|
|Effective cutting size||1500mm×3000mm|
1.plasma and flame cutting torches
2.plasma and flame torch are on same lifter.
3.flame torch with auto-igniting device.
Plasma cutting thickness
Flame cutting thickness
plasma: according to plasma generator
|The cutting torch height||≤170mm|
Plasma Cutting speed
Flame cutting speed
(more thicker metal,more slower flame-cutting speed.)
|II. Critical Parts List|
|Name||brand & specifications||set|
|Plasma machine frame||heavy duty frame with 4.5mm thickness||1|
|Rotary device||Diameter 150mm, length 3000mm||1|
(7 inch diplay screen)
|Arc Voltage Plasma Torch Height Controller||HYD Arc Voltage Plasma Height Controller XPTHC-5||1|
|Motor & driver||86 stepper motor & Leashine driver M860H||3|
|Rail||Taiwan Hiwin NO 20 square linear rails||4|
|Rack||Longitudinal 7 precision rack|
|Switches & contactors||Schneider|
|High strength bearing||Japanese NSK|
|Anti-collision device||JINAN QUALITY CNC||1|
|Independent control cabinet||JINAN QUALITY CNC||1|
|Automatic programming and nesting software||Australian FastCAM software||1|
|Warranty time||3 years (replace parts during warranty for no human reasons)|
|III. Machine Frame|
|1.The gantry adopts the German messel technology and the machine frame with eliminating structure of torsional moment. The gangtry is a cast-steel structure, so that it will not be deformed in long-term use.|
|2.The mechanical transmission system all USES the precision rolling bearing and the processing precision is the national standard 7 class precision gear and the rack meshing.|
|3.The automatic compensation gap device is added in the transverse and longitudinal gear transmission structure, so that the transmission structure can accurately execute the instructions from the numerical control system.|
|4.Active end beam: longitudinal track adopts linear slide rail to make it run smoothly in two tracks.|
|5.All parts and components of the machines are treated with blackening, electroplating and other surface treatments.|
|6.The whole machine is sprayed primer after sandblasting, surface paint using orange paint, the color of red and black.|
|IV. Mechanical Accuracy|
|Linear positioning accuracy||±0.1mm/10m||Linear repetition accuracy||±0.4mm/10m|
|Cutting torch stroke accuracy||≤100mm||Cutting speed accuracy||±5% speed set|
|Cutting torch automatic lifting precision||±0.5mm|
|Side length error (four sides)||0.5mm||Diagonal deviation||0.5mm|
|Return to origin deviation||0.3mm||Intersection point deviation||0.5mm|
|Diagonal straightness||0.5mm||2-direction Line deviation||0.2mm|
|Positioning accuracy of the whole machine||0.1mm|
|V. Work Environment|
|Input voltage||220/380V±10% 50Hz±1%
plasma generator: 380V±10%; control cabinet: 220V±10%
|Ambient temperature||0 to 40 ℃||Relative humidity||95% (non-condensation)|
Machine Parts of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
Cutting thickness of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
|Chinese HuaYuan Brand|
|Hua Yuan 63A||< 5mm|
|Hua Yuan100A||<carben steel 12mm,stainless steel 6mm|
|HuaYuan120A||<carben steel 18mm,stainless steel 10mm|
|HuaYuan160A||<carben steel 25mm,stainless steel 15mm|
|HuaYuan200A||<carben steel / aluminium 30mm,stainless steel 20mm|
|USA Hypertherm Brand|
|Hypertherm45A||<carben steel 8 mm,stainless steel 5mm|
|Hypertherm65A||<carben steel 12mm,stainless steel 8mm|
|Hypertherm85A||<carben steel 16mm,stainless steel 12mm|
|Hypertherm105A||<carben steel 20mm,stainless steel 14mm|
|Hypertherm125A||<carben steel 25mm,stainless steel 16mm|
|Hypertherm 200A||<carben steel 32mm,stainless steel 22mm|
Our service of Cnc Plasma Metal Cutting Machine 1530 With Flame Cutting And Rotary
1. The company who initially provide 3 years warranty in the world;
2. 24-hour full after sales service;
3. All finished machines we delivered are 100% strictly tested by our QC department and engineering department and sending working zamples together with machines;
4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.
5. Standard Package List as below:
|QCP 1530 plasma and flame cutting (auto-igniting) machine||1 SET|
|Plasma generator according to your need||1 SET|
|Nozzles and electrodes||
Hypertherm: 2 sets
(HuaYuan :10 sets)
|Australian FastCAM software with dongle||1 SET|
|Proximity limit (as spare part)||1 PIC|
|Allen wrenches||1 SET|
|U DISK (operating manual and videos)||1 PIC|
|Cutting zample||1 PIC (as your requirements)|
Q1: How about warranty?
A1: 36-months quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.
We offer lifetime technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.
Q2: What's the delivery time?
A2: 10-15 working days to delivery port.
Q3: What's the usually delivery terms?
A3: FOB, CIF, DDP, Exworks will be OK.
Q4: What's the MOQ?
A4: 1 set.
Q5: What's the delivery port?
A5: Usually Qingdao port, also we can deliver machines to Shanghai port and Guangzhou.
Q6: What's the packing?
A6: Iron Pallet and export- standard Plywood cases .
Q7: Can I change the motor to my local voltage and frequency, Is there any extra charge?
A7: Yes, we can supply motor ,all parts and components with your local frequency and voltage, such as 220V/380V/410V/415V/440V, and 50HZ/60HZ with no-profit charge.
Q8: Can you place OEM orders?
A8: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q9:Where is your factory located? How can I visit there?
A9:Our factory is located in JiNan City, Shandong Province, China, about 2 hours from Beijing, 3.5 hours from Shanghai and 10 hours from Guangzhou by high-speed train.
Contact Person: Miss. Carol Zhu
Tel: 0086 131 7644 1785