Payment & Shipping Terms:
|Name:||Dual Laser Heads Co2 Laser Garment Cutting Machine With CCD Camera||Control System:||RD Visual Positioning Cutting Software RDVisionCut|
|Working Area(mm):||1600*1000mm||Motor & Driver:||Stepper Motor & Leadshine Driver|
|Rail:||Hiwin Square Linear Rails||Cutting Speed:||0-200mm/s (according To The Different Materials And Thickness)|
|Engraving Speed:||0 - 1000mm/s (according To The Effect Required)||Application:||Cloth Leather Textile Fabric Cutting|
mixed laser cutting machine,
co2 laser engraver engraving machine
QCL1610-CCD CO2 laser cutting machines (cutter engraver machines) with CCD camera can engrave and cut almost any non-metallic materials, it can cut as the outlines of the shooting, and automatically cutting edge of its trademarks, which is widely used in fabric, leather, textile, garment and cloth cutting industry. With the personalized apparel industry development , more and more shaped marks are demanded, the past can not meet the needs of traditional cutting process, but CCD camera laser cutting machine is the perfect do-shaped mark cutting.
1. The CCD camera laser cutter can compensate automatically to pinpoint deformation of the fabric, and it ensures the accuracy of cutting;
2. Double laser heads auto movable processing,double efficiency comparing with one laser head;
3. The camera can get every edge of the objection and extend (entad or forth) expected distance, and then cut them. According to common knowledge, the fabric labels may a little different from each other, and adoption of this technology can solve this problem;
4. Install 2-3 million pixel colorful camera. Can do accurately locating cutting for those edge-immovable objections. For example, it can accurately cut those distorted-not-much fabric labels;
5. No burr/fraying with laser cutting: Laser cutting is done by high temperature process. It can make cut edge to close up automatically. Hence, no need to recut the patterns after one-time cutting;
6. No distortion to the processed fabric:In the process of cutting, laser dose not touch the processed fabric, but laser beam works on the fabric;
7. High precision:Diameter of the laser beam can be focalized into 0.1mm (we adopt top lens imported). Cutting is done exactly according to uploaded graphics through computer control;
8. The rolls of the laser fabric cutter are able to roll up the large material automatically and improve the working efficiency greatly;
9. With open stainless meshed worktable ( also called crawler-type working table ), which is suitable for textile cutting, fabric cutting, clothing cutting, leather cutting, etc. play a vacuum adsorption, which can make the soft material very flat;
10. With laser automatic water protection function to ensure the safe operation of the laser tube;
14. The motion system adopts Taiwan Hiwin linear guide and slider, the movement track is smooth and delicate, the speed and precision are greatly improved, and the wear is small, prolonging the life of mechanical moving parts;
visual positioning, trademark cutting, image analysis
1). Feature image positioning;
2). Mark point positioning;
3). Contour identification and cutting;
4). Online and offline operation modes can be available : supporting 10/100M Ethernet and supporting all brands and capacities of U disks;
5). Ethernet data transmission with data safety verification to ensure the data accuracy when at high speed data transferred.
6). Self-adaption identifying path planning
8). 256M large-capacity file nonvolatile storage onboard, no bottlenecks limit for file size;
9). With professional motion control chip , it has the function of high speed curve cutting and the shortest path selection, which largely improves your working efficiency.;
10). Display processing path, file preview;
11). Display processing progress bar;
12). The controller has better resistance to high voltage and antistatic ability;
13). Soft/hard limit coordinates protection for optional;
14). Online update mainboard program, convenient for maintenance and functions customization and free upgrade service is available
15). Support Power-off restart for engraving, work time preview (high accuracy to millisecond, the preview time is exact to the actual working time);
16). Support machines backlash compensation function;
17). System Power-on resetting or not resetting for optional;
18). Support multiple positioning points logic;
19). All manufacturer/user parameters can be backup and restored.
Applications of Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera:
QCL CO2 Cloth Leather Textile laser cutting machines (cutter and engraver machines) has a wide range of processing materials, smooth cutting edges, no burrs, no polishing, no noise, no dust, fast processing speed, high precision, less waste and high efficiency.
Machine technical parameters of Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera:
Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera
|Working Platform||honey-comb working table|
|Controlling System||RD visual positioning cutting software RDVisionCut|
|Laser Type||CO2 sealed-glass tube with circulating-water cooling|
|Engraving speed||0 - 1000mm/s (according to the effect required)|
|Cutting Speed||0-200mm/s (according to the different materials and thickness)|
|Cutting Thickness||According to the thickness and materials|
|Power Range||0--100% can be adjusted in controlling panel or software|
|Resetting Positioning Accuracy||±0.01mm|
|Min. Shaping Character||
English character 1mm*1mm
Chinese character 2mm*2mm
|Driving System||DC3.2A 48V 3 phase stepper motor Leadshine or YAKO brand|
|Position System||Red dot (as standard machine part)|
|Front-rear Channel Feed Function||Yes, Channel feed for infinite length material processing|
|Laser Tube Power||
RECI W2 ( 90-100w ) ;
W4 ( 100-130W );
W6 ( 130-160W );
W8 (160-190W ).
|Working life of tube||3000-10,000 hours (under EFR / RECI operating instructures)|
|Laser Tube Cooling Mode||Circulating water cooling (water pump or water chiller with the machine)|
1. Laser engraving cutting controlling software RDWorksV8 or Lasercut2017 (English version)
2. User manual of laser machine(English version)
3. User manuals of software and controllor system
4. USB cable and Ethernet cable (for communicating with computer.)
5. 3 reflecting mirrors (has been installed in the machine)
6. one focus lens(has been installed in the machine )
7. one laser tube(we remove it from the machine for delivery safety)
8. auxiliary devices: water pump for circulating laser tube;
air compressor for blowing off smoke;
dust exhaust fan to carry smoke to outside.
9. tool box for repairing and maintenance.
10. CCD camera.
|EXTRA PARTS need extra fee||
1. industrial chiller cw3000 /5000 /5200.
2. Air filter (no need to carry smoke outside).
3. Air compressor for improve cutting edge.
4. Automatic feeding conveyor system.
|Graphic Format Supported||
Vector format:dxf, ai, plt, dst, dsb…etc.
Bitmap format:bmp, jpg, gif, png, mng,…etc.
|Software Supported||CorelDraw, AutoCAD , Photoshop, Adobe illustrator,Tajima|
|Computer Interface||Off-line/USB / ETHNET / ROUTER (wifi connecting)|
|Power Supply||AC 2 phase 220V/50Hz, 110V/60Hz|
Humidity 5%-95% (no condensation)
|Applicable Materials||It can cut and engrave non-metallic materials such as acrylic, two-color board, PVC, wood board, MDF, leather, paper, cloth, etc. It can also engrave glass and stone.|
|Applicable Fields||Advertising industry, decoration and decoration industry, photo (frame)processing, craft gifts,cloth /leather processing, glass /stone/tombstone/marble/ engraving and other industries|
Machine Parts of Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera:
High resolution camera of CNC laser cutter:
RD controlling panel + Amperemeter+ Laser switches for laser1 and laser 2+Light adjustor of camera+Laser power adjustor+Exhausted fan switch
controlling carbint of CNC laser cutter:
CNC laser cutter processing.....
Our service of Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera:
1. The company who initially provide 3 years warranty in the world;
2. 24-hour full after sales service;
3. All finished machines we delivered are 100% strictly tested by our QC department and engineering department and sending working zamples together with machines;
4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.
5. Standard Package List as below:
Dual Laser Heads Co2 Laser Garment Cutting Machine with CCD Camera
|Laser tube and laser supplier||2 set|
|Air pump /compressor||2 set|
|Exhausted fan 550W||2 set with pipes and fixing rings|
|Tool box||1 set (with Allen wrenches,acrylic blocks for alignment, U disk, working samples and so on)|
|Extra parts||as per your order|
Q1: How about warranty?
A1: 36-months quality guaranty, the machine with main parts(excluding the consumables such as laser tube and reflectors and lens) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.
We offer lifetime technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.
Q2: What's the delivery time?
A2: 5-8 working days to delivery port.
Q3: What's the usually delivery terms?
A3: FOB, CIF, DDP, Exworks will be OK.
Q4: What's the MOQ?
A4: 1 set.
Q5: What's the delivery port?
A5: Usually Qingdao port, also we can deliver machines to Shanghai port and Guangzhou.
Q6: What's the packing?
A6: Iron Pallet and export- standard Plywood cases .
Q7: Can you place OEM orders?
A7: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q8:Where is your factory located? How can I visit there?
A8:Our factory is located in JiNan City, Shandong Province, China, about 2 hours from Beijing, 3.5 hours from Shanghai and 10 hours from Guangzhou by high-speed train.
Contact Person: Zhu